Fehlermeldung beim speichern der config.xml!!!

Willkommen › Foren › LogoControl › Fehlermeldung beim speichern der config.xml!!!

Log In Register Lost Password
6 Beiträge anzeigen - 1 bis 6 (von insgesamt 6)
  • Autor
    Beiträge
  • 3. November 2016 um 19:50 #3120
    grobie
    Teilnehmer

    Hallo, ich habe gerade versucht meine config.xml anzupassen. Es kommt beim speichern aber zu einer Fehlermeldung!!!

    „Error saving config.xml. expected ‚;‘ but found’=’… mit dem verweis auf eine Zeile in der folgender HTTP-Aufruf mit ‚method‘ gemacht wird:

    „http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=32&nvalue=0“

    mit der alten LogoControl-Version funktionierte das bestens!?

    Mit dem Aufruf wird der Status der Logo an Domoticz weitergegeben…

    3. November 2016 um 20:40 #3121
    admin
    Administrator

    Hi,

    versuch mal das Kaufmannsund zu escapen, ist sonst wohl nicht XML-Konform:
    http://stackoverflow.com/questions/1091945/what-characters-do-i-need-to-escape-in-xml-documents

    3. November 2016 um 21:04 #3123
    grobie
    Teilnehmer

    Danke das war schon mal gut, die nächste Fehlermeldung kam aber prompt:

    Error saving … Invalid identity constraints were found. Referenced key was not found: line 0, position 0

    ???

    3. November 2016 um 21:23 #3124
    grobie
    Teilnehmer

    hier mal meine config.xml:

    
<configuration>
	<settings>
		<plc id="myLogo" type="Logo7" ip="0.0.0.0" />
		<httpWebservice port="8088" />
		<valueTextConverter>
			<!-- Verschiedene Konverter zur Überführung von Value (ganzzahliger Rohwert aus der Logo) in ValueText (Anzeigewert für den Benutzer) -->
			<textMapping id="an_aus">
				<!-- Text-Mapping für aus (0) und an (1) -->
				<valueText value="0" text="aus" />
				<valueText value="1" text="an" />
			</textMapping>
			<textMapping id="rollo">
				<!-- Text-Mapping für Rolläden -->
				<valueText value="1" text="hoch" />
				<valueText value="2" text="stop" />
				<valueText value="3" text="runter" />
			</textMapping>
		</valueTextConverter>
	</settings>
	<infrastructure>
		<group name="Erdgeschoss">
		<group name="Wohnzimmer">
    		<device id="101" name="Licht" type="light">
					<attribute id="1" name="state" plc="mylogo" address="942.3" valueTextConverter="an_aus"/>
					<method id="1" name="ein" plc="myLogo" address="1.1"/>
					<method id="2" name="aus" plc="myLogo" address="1.2"/>
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=32&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=32&nvalue=1"/>
                    
                    <trigger address="949.6" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
			</device>
            <device id="102" name="Funksteckdose 1" type="light">
                  		
					<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=88&switchcmd=Toggle" />
				
					<trigger address="948.0" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
            <device id="103" name="Funksteckdose 2" type="light">
                    		
					<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=93&switchcmd=Toggle" />	
				
					<trigger address="948.5" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
            <device id="104" name="Rolladen" type="custom">

           			<method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=13&switchcmd=Toggle"/>
	                <method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=14&switchcmd=Toggle"/>
	                <method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=15&switchcmd=Toggle"/>
			</device>
		</group>
		<group name="Esszimmer">
			<device id="201" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="942.5" valueTextConverter="an_aus"/>
					<method id="1" name="ein" plc="myLogo" address="2.1" />
					<method id="2" name="aus" plc="myLogo" address="2.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=43&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=43&nvalue=1"/>
                	
                    <trigger address="949.7" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
       		<device id="202" name="Rolladen" type="custom">

           			<method id="1" name="hoch" url="http:/192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=16&switchcmd=Toggle"/>
           			<method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=17&switchcmd=Toggle"/>
           			<method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=18&switchcmd=Toggle"/>
			</device>
   		</group>
		<group name="Küche">
			<device id="301" name="Licht" type="light">
					<attribute id="1" name="state" address="942.6" plc="myLogo" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="3.1" />
					<method id="2" name="aus" plc="myLogo" address="3.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=42&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=42&nvalue=1"/>
                    
					<trigger address="950.0" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
             </device>				
			<device id="302" name="Funksteckdose" type="light">

            		<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=90&switchcmd=Toggle" />

					<trigger address="948.1" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
	        <device id="303" name="Rolladen" type="custom">

           			<method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=19&switchcmd=Toggle"/>
	                <method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=20&switchcmd=Toggle"/>
	                <method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=21&switchcmd=Toggle"/>
			</device>
		</group>
		<group name="WC EG">
			<device id="401" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="942.7" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="4.1" />
					<method id="2" name="aus" plc="myLogo" address="4.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=41&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=41&nvalue=1"/>
                    
                    <trigger address="950.1" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
     		</device>
		</group>
		<group name="Windfang">
			<device id="501" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="942.1" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="5.1" />
					<method id="2" name="aus" plc="myLogo" address="5.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=40&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=40&nvalue=1"/>
                    
                    <trigger address="949.4" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
             </device>
		</group>
      	</group>
		<group name="Obergechoss">
		<group name="Ankleidezimmer">
			<device id="701" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="943.0" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="7.1" />
					<method id="2" name="aus" plc="myLogo" address="7.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=38&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=38&nvalue=1"/>
                    
                    <trigger address="950.2" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
	        <device id="702" name="Rolladen" type="custom">

					<method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=25&switchcmd=Toggle"/>
			       	<method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=26&switchcmd=Toggle"/>
			        <method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=27&switchcmd=Toggle"/>
			</device>
		</group>
		<group name="Kinderzimmer">
			<device id="801" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="943.1" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="8.1" />
					<method id="2" name="aus" plc="myLogo" address="8.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=37&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=37&nvalue=1"/>

                    <trigger address="950.3" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
       		<device id="802" name="Rolladen" type="custom">

           			<method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=28&switchcmd=Toggle"/>
       				<method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=29&switchcmd=Toggle"/>
       				<method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=30&switchcmd=Toggle"/>
			</device>
   		</group>
		<group name="Büro">
			<device id="901" name="Licht" type="light">
					<attribute id="1" name="state" address="943.2" plc="myLogo" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="9.1" />
					<method id="2" name="aus" plc="myLogo" address="9.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=36&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=36&nvalue=1"/>
                    
                    <trigger address="949.2" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
			<device id="902" name="Funksteckdose" type="light">
                    
            		<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=114&switchcmd=Toggle" />
            
					<trigger address="948.2" datatype="bit">
						<onValue value="1" method="1" />
						
					</trigger>
			</device>
       		<device id="903" name="Rolladen" type="custom">

	   				 <method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=11&switchcmd=Toggle"/>
       				 <method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=12&switchcmd=Toggle"/>
           			 <method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=10&switchcmd=Toggle"/>
			</device>
   		</group>
		<group name="Badezimmer">
			<device id="1001" name="Licht" type="light">
				<attribute id="1" name="state" address="943.3" plc="myLogo" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="10.1" />
					<method id="2" name="aus" plc="myLogo" address="10.2" />
                	<method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=35&nvalue=0"/>
                	<method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=35&nvalue=1"/>
                    
                    <trigger address="950.4" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
           	<device id="1002" name="Rolladen" type="custom">

   			        <method id="1" name="hoch" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=22&switchcmd=Toggle"/>
	                <method id="2" name="stop" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=23&switchcmd=Toggle"/>
		            <method id="3" name="runter" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=24&switchcmd=Toggle"/>
			</device>
		</group>
		</group>
		<group name="Dachgeschoss">
  		<group name="Schlafzimmer">
			<device id="1101" name="Licht" type="light">
					<attribute id="1" name="state" address="943.4" plc="myLogo" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="11.1" />
					<method id="2" name="aus" plc="myLogo" address="11.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=34&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=34&nvalue=1"/>
                    
                    <trigger address="950.5" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
            <device id="1102" name="Funksteckdose" type="light">

					<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=89&switchcmd=Toggle" />

			        <trigger address="948.3" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
       	</group>
		<group name="WC DG">
			<device id="1202" name="Licht" type="light">
					<attribute id="1" name="state" plc="myLogo" address="943.5" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="12.1"  />
					<method id="2" name="aus" plc="myLogo" address="12.2"  />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=33&nvalue=0"/>
                    <method id="3" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=33&nvalue=1"/>
                    
                    <trigger address="950.6" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
   		</group>
		</group>
	    <group name="Allgemein">
		<group name="Flur">
			<device id="601" name="Flur" type="light">
					<attribute id="1" name="state" plc="myLogo" address="942.2" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="6.1" />
					<method id="2" name="aus" plc="myLogo" address="6.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=39&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=39&nvalue=1"/>

                    <trigger address="949.5" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
            </device>
            <device id="602" name="Funksteckdose" type="light">

            		<method id="1" name="ein/aus" url="http://192.168.178.25:8080/json.htm?type=command&param=switchlight&idx=92&switchcmd=Toggle" />

					<trigger address="948.4" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
		</group>
		<group name="Extern">
       		<device id="1401" name="Aussenlicht" type="light">
				<attribute id="1" name="state" plc="myLogo" address="942.0" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="14.1" />
					<method id="2" name="aus" plc="myLogo" address="14.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=50&nvalue=0"/>
					<method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=50&nvalue=1"/>
                    
                    <trigger address="949.3" datatype="bit">
						<onValue value="0" method="3" />
						<onValue value="1" method="4" />
					</trigger>
           	</device>
			<device id="1301" name="Garagentor" type="custom">

					<method id="1" name="auf/zu" address="13.1" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=51&nvalue=0"/>
			</device>
		</group>
		<group name="Heizung">
       		<device id="1501" name="Sparbetrieb" type="custom">
				<attribute id="1" name="state" plc="myLogo" address="943.6" valueTextConverter="an_aus"/>
  					<method id="1" name="ein" plc="myLogo" address="15.1" />
					<method id="2" name="aus" plc="myLogo" address="15.2" />
                    <method id="3" name="status aus" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=108&nvalue=0"/>
                    <method id="4" name="status ein" url="http://192.168.178.25:8080/json.htm?type=command&param=udevice&idx=108&nvalue=1"/>

                    <trigger address="950.7" datatype="bit">
						<onValue value="0" method="4" />
						<onValue value="1" method="3" />
					</trigger>
            </device>
		</group>
   		<group name="Rolladen">
            <device id="1601" name="Alle hoch" type="custom">

					<method id="1" name="ein" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=9&switchcmd=on" />  

					<trigger address="949.1" datatype="bit">
						<onValue value="1" method="1" />
					</trigger>
			</device>
            <device id="1602" name="Sonnenschutz Straßenseite" type="custom">
                			
					<method id="1" name="ein" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=32&switchcmd=On"/>
			</device>
            <device id="1603" name="Sonnenschutz Gartenseite" type="custom">

					<method id="1" name="ein" url="http://192.168.178.25:8080/json.htm?type=command&param=switchscene&idx=31&switchcmd=On"/>
			</device>
   		</group>
		</group>
	</infrastructure>
</configuration>
    4. November 2016 um 9:30 #3126
    admin
    Administrator

    OK, die Fehlermeldung, die der Parser da ausspuckt ist ohne Angabe der Zeilennummer natürlich nutzlos. Hab das XML mal mit einem externen Validator validiert:

    Die IDs sowie die Referenzen darauf sind case-sensitiv. Du hast an einer Stelle „mylogo“ statt „myLogo“ geschrieben, daher das „Referenced key was not found“.

    4. November 2016 um 9:40 #3127
    grobie
    Teilnehmer

    TOP!!! Werde das sofort ausprobieren…

    Super!!! funktioniert bestens!!!

    Danke!!!

    nun muss ich das neue System nur noch vor Ort in Betrieb nehmen….

    • Diese Antwort wurde vor vor 8 Jahren, 1 Monat von grobie bearbeitet.
  • Autor
    Beiträge
Log In Register Lost Password
6 Beiträge anzeigen - 1 bis 6 (von insgesamt 6)
  • Du musst angemeldet sein, um zu diesem Thema eine Antwort verfassen zu können.